944 Intake Port Covers

Post Reply
User avatar
Tom
Site Admin
Posts: 8952
Joined: Fri Jun 25, 2021 2:04 pm
Location: Silicon Valley, CA
Has thanked: 936 times
Been thanked: 4016 times
Contact:
Contact Tom
Here is a model for an intake port cover, to keep stuff out of the intake while working on the motor (or storing it). They just look way cooler than stuffing paper towels in there. :)


intake port cover.jpeg
You need to be registered and logged in to download files. Registration is free and easy!

#1

Top
User avatar
Lowencash
Posts: 43
Joined: Wed Oct 13, 2021 4:51 pm
Has thanked: 38 times
Been thanked: 19 times
Thank you for this, Tom. Had some printed up (locally) and are now installed. SO much better than rags!

#2

Top
User avatar
stitch2k1
Posts: 293
Joined: Mon Apr 25, 2022 11:32 pm
Location: Orlando, FL
Been thanked: 30 times
Any chance you could make these (and the spark plug plugs) for a 16v head? Same for the exhaust ports too now that I think of it.
Porsche 944S2 5MT '91
BMW E39 540iT 6MT '00
Mercedes-Benz W201 190E 2.6 5MT '89
IG: @stitch2k1

#3

Top
User avatar
Tom
Site Admin
Posts: 8952
Joined: Fri Jun 25, 2021 2:04 pm
Location: Silicon Valley, CA
Has thanked: 936 times
Been thanked: 4016 times
Contact:
Contact Tom
stitch2k1 wrote: Fri Apr 14, 2023 7:15 pm Any chance you could make these (and the spark plug plugs) for a 16v head? Same for the exhaust ports too now that I think of it.
Sure, scan a gasket and post with dimensions for the port covers. Are the spark plug wells different than the 8v?

#4

Top
Brice
Posts: 1
Joined: Tue Jan 21, 2025 12:44 pm
Has thanked: 1 time
Posts: 5
Joined: Wed Jan 24, 2024 2:37 pm
nice. i will try do do it myself! thks

#5

Top
Post Reply