Rear Windshield wiper delete

Post Reply
yugami
Posts: 52
Joined: Mon Sep 04, 2023 5:19 am
Has thanked: 14 times
Been thanked: 16 times
I printed this in ASA with a 3% shrink compensation. Uses a M3 Heatsert and a M3x5 SHCS.

Sized to use the factory grommet, but if that isn't available theres a cutout at 20mm which will accept TPU filament as a oring.

Tested on my '88 944 via car wash.
You need to be registered and logged in to download files. Registration is free and easy!

#1

Top
Post Reply