Inspired by a product I saw online, I made my own (much simpler) tool you can use to add a tracer stripe to any wire. If you just need a few feet of wire to match a harness, it can be cost-prohibitive to find exactly the right wire and tracer color. I wouldn't suggest doing an entire harness this way, but to make a patch here and there, this is kind of a cool/cheap/easy way to maintain the factory color scheme....
Wire trace stripe tool
- Tom
- Site Admin
- Posts: 5251
- Joined: Fri Jun 25, 2021 2:04 pm
- Location: Silicon Valley, CA
- Has thanked: 490 times
- Been thanked: 2316 times
- Contact:
You need at least one post on Carpokes to see and download files.
- Tom
- Site Admin
- Posts: 5251
- Joined: Fri Jun 25, 2021 2:04 pm
- Location: Silicon Valley, CA
- Has thanked: 490 times
- Been thanked: 2316 times
- Contact:
- Arne2
- Posts: 221
- Joined: Sat Sep 17, 2022 5:47 pm
- Location: Western Oregon
- Has thanked: 8 times
- Been thanked: 113 times
OK, it may be time to invest in a 3D printer. Any recommendations for a reasonable hobbyist tool?
- Arne
Current - 2018 Cayman 2.0 litre
Past - 1984 911 Carrera, 1984 944, 1973 914 2.0, 1972 911T
Current - 2018 Cayman 2.0 litre
Past - 1984 911 Carrera, 1984 944, 1973 914 2.0, 1972 911T