Page 1 of 1
ABS Harness Repair
Posted: Sun Feb 18, 2024 10:28 am
by TN996C4S
I’ve installed the left front abs repair harness and am trying to determine where to splice in.
Has anyone here done the left front before? Mine is an ‘03 C4S, but would expect all 996’s to be the same.
Tks-
Joseph
Re: ABS Harness Repair
Posted: Sun Feb 18, 2024 4:18 pm
by TN996C4S
Got it done. Left enough slack to support future replacement. Maybe a 5 channel plug would have been one step better.
Re: ABS Harness Repair
Posted: Sun Feb 18, 2024 5:14 pm
by TN996C4S
Those are in reverse order.
All buttoned up
Loop fully shrinked
Shrinking
First shrink
Test-fit to prove that the harness fixed the problem (it did)
Stuffing the harness through the inner fender
Last two, replacing the harness.
Re: ABS Harness Repair
Posted: Sun Feb 18, 2024 7:08 pm
by blueline
Glad you got it done and that it fixed the problem.
Re: ABS Harness Repair
Posted: Mon Feb 19, 2024 7:40 am
by J-Dub
Nice work, glad you were able to fix it. I may have missed it previously but what led to this harness needing to be replaced?
Re: ABS Harness Repair
Posted: Mon Feb 19, 2024 4:26 pm
by TN996C4S
The second picture from the bottom shows the split on the harness side of the abs plug. The brake wear circuit was still intact by the abs was not, hence the P4205 code and abs/psm lights.
Joseph