This is the little vent grille next to the clock on the late 944 and 968. Pet calls it "Rosette Interior Sensor" and is part number 944.552.451.00 This model is a replica of the factory. Printed in black ABS on a textured PEI plate and then dusted with flat black paint to dull the sparkle effect of the textured plate. One of these is the factory part, the other is 3D printed on my Bambu X1C (.12 layer height, tree supports for the clips). Can you tell which is which? Very hard to tell it's not the factory part, and fits like a glove.
944 Interior Sensor Rosette
- Tom
- Site Admin
- Posts: 5126
- Joined: Fri Jun 25, 2021 2:04 pm
- Location: Silicon Valley, CA
- Has thanked: 477 times
- Been thanked: 2240 times
- Contact:
You need at least one post on Carpokes to see and download files.
-
- Posts: 40
- Joined: Thu Jul 14, 2022 7:45 am
- Has thanked: 1 time
- Been thanked: 17 times
I need one of these, mine has a chipped tooth on the back and is a little loose now.