Page 13 of 14
Re: 944 Odometer Gears
Posted: Tue May 20, 2025 4:56 pm
by srcooley3
Thank you for this model!
Re: 944 Odometer Gears
Posted: Thu May 22, 2025 3:00 am
by Silver99
Hello all, this 20/29 odogear was requested locally in the Czech Republic and has not been tried yet.
Please, take it as prototype!
Thanks to model included here I was able to model it.
Any feedback from the physical test is welcome. Thanks!
Re: 944 Odometer Gears
Posted: Fri Jun 06, 2025 8:53 am
by Tom
My odometer stopped working yesterday, and I thought my 3D-printed gear failed. Took it apart only to realize the speedometer still had the original amber gear, with missing teeth! Turns out I never installed my own gear in my own car.
So, time to put my money where my mouth is and run the ceramic/resin printed gear in a real car. It's been tested on the bench up to about 50k miles, so I'll be watching closely to see how long it lasts in the actual car. My hope and expectation is that it will last longer than the rest of the car!
broken-gear.jpg
broken-gear-2.jpg
new-gear.jpg
Re: 944 Odometer Gears
Posted: Sat Jun 07, 2025 8:34 am
by Gaspowered
I actually did the exact repair two days ago!
My issue now is the air bag light is constantly on.
Cheers
Re: 944 Odometer Gears
Posted: Mon Aug 18, 2025 2:26 pm
by danlandoni
Bumping to thank for gear!
Re: 944 Odometer Gears
Posted: Thu Sep 04, 2025 7:38 am
by cmusial
Bumping thank you for the model!
Re: 944 Odometer Gears
Posted: Sun Oct 12, 2025 10:17 pm
by RedHotel
Thank you for the files!
Re: 944 Odometer Gears
Posted: Sun Oct 19, 2025 4:43 pm
by Daniel944
Just what I need. I’m new to the 944 seen
Thanks for sharing
Re: 944 Odometer Gears
Posted: Fri Oct 31, 2025 4:56 pm
by JasonLP
Thank you again!
Re: 944 Odometer Gears
Posted: Wed Nov 19, 2025 4:47 pm
by choupinette944
Tom wrote: Sat Jul 30, 2022 3:05 pm
After much modeling and testing, I'm happy to post these 944 Odometer Gears. If printing on an FDM printer, be aware that support is needed. The 'flat' side isn't all flush to the print bed. Both 20/21 and 20/22 versions are available.
944 Odometer Gear 20_21 by Carpokes.stl
944 Odometer Gear 20_22 by Carpokes.stl
See a user-submitted 20-29 gear in post #122 of this thread.
And if you are missing any of the rubber feet that go under the speedometer, here is a file for that as well. Prints easily in Ninjaflex of other TPU material on a most standard printers.
944 Speedometer Feet.stl
Thanks for the files!