Re: S2 Hard Fuel Line Adapters
Posted: Sun Mar 03, 2024 6:28 am
- IMG_4646 2.jpg (1.95 MiB) Viewed 609 times
- IMG_4639.jpg (1.58 MiB) Viewed 609 times
- IMG_4638 2.jpg (1.68 MiB) Viewed 609 times
Carpokes Porsche Forum
A grassroots Porsche technical community
https://carpokes.com/
S2 Hard Fuel Line Adapters
Page 2 of 2
Re: S2 Hard Fuel Line Adapters
Posted: Sun Mar 03, 2024 10:57 am
Looks nice!
However....I hate to say it, but I believe a 3/8" line is too big for the fuel rail nipples. They are only 7 mm or so. 3/8 is 10mm line...be careful! Make absolutely sure you can't pull that damper line off the fuel rail once you stick it on there, before any clamps are applied.
However....I hate to say it, but I believe a 3/8" line is too big for the fuel rail nipples. They are only 7 mm or so. 3/8 is 10mm line...be careful! Make absolutely sure you can't pull that damper line off the fuel rail once you stick it on there, before any clamps are applied.
Re: S2 Hard Fuel Line Adapters
Posted: Tue Mar 05, 2024 12:39 pm
Can vouch for these! Ordered them from Rennbay for my 16V S, perfect fit and fantastic workmanship at a fair priceRennbay wrote: Fri Feb 02, 2024 3:25 pm We make these bolt-on for the S/S2/968. They use the correct fittings, mating directly to Aeroquip socketless hose (-6).
If you have different fittings on the rail, they make just about everything to mate to this hose (AN/JIC). I could make you up a hybrid set or leave the rail ends to you or sell you just the hard-line fittings. Whatever you need just let me know.
s2fline2.jpgs2fline1.jpg
Re: S2 Hard Fuel Line Adapters
Posted: Tue Mar 05, 2024 2:18 pm
I missed that post by @Rennbay , so late to the party, but I can definitely vouch for the Rennbay fuel lines. I had a 10-year old set of fuel lines from a different vendor that ended up splitting open. Went with the Rennbay lines this time and am very happy with them. The custom fittings make them less bulky too. They get the Carpokes seal of approval.sefeing wrote: Tue Mar 05, 2024 12:39 pmCan vouch for these! Ordered them from Rennbay for my 16V S, perfect fit and fantastic workmanship at a fair priceRennbay wrote: Fri Feb 02, 2024 3:25 pm We make these bolt-on for the S/S2/968. They use the correct fittings, mating directly to Aeroquip socketless hose (-6).
If you have different fittings on the rail, they make just about everything to mate to this hose (AN/JIC). I could make you up a hybrid set or leave the rail ends to you or sell you just the hard-line fittings. Whatever you need just let me know.
s2fline2.jpgs2fline1.jpg
