Page 2 of 3
Re: Need an engineering mindset…951 crank pulleys
Posted: Tue Sep 05, 2023 4:26 pm
by Drscottsmith
Ok tks -
Scott Smith
353 Old South Rd
Duncan, SC 29334
Thanks again!
Re: Need an engineering mindset…951 crank pulleys
Posted: Wed Sep 06, 2023 7:40 am
by chris white
On the way!
Re: Need an engineering mindset…951 crank pulleys
Posted: Wed Sep 06, 2023 4:06 pm
by chris white
Here’s a pic of the trigger wheel I made up.
Re: Need an engineering mindset…951 crank pulleys
Posted: Wed Sep 06, 2023 6:02 pm
by Drscottsmith
Nice work!!
Re: Need an engineering mindset…951 crank pulleys
Posted: Sun Sep 10, 2023 12:39 pm
by Drscottsmith
Ok got the spacer installed (I just used one at first). Thanks again, Chris!
Still got nothing on the gauge but wanted more evidence. Here is a quick video of the oil filter housing with filter removed.
I definitely have oil flowing, but need to know what this video tells us.
Re: Need an engineering mindset…951 crank pulleys
Posted: Sun Sep 10, 2023 2:33 pm
by chris white
Pull out the spark plugs to turn it over - it will spin twice as fast. If that still dosent work put 5-10 psi of air pressure into the dipstick holder
Re: Need an engineering mindset…951 crank pulleys
Posted: Sun Sep 10, 2023 2:35 pm
by Drscottsmith
What am I looking for different? I feel better since I can see oil flowing.
Do I just have to crank a long time to see pressure build?
Plugs are out in that video.
Re: Need an engineering mindset…951 crank pulleys
Posted: Sun Sep 10, 2023 4:16 pm
by Drscottsmith
Thanks all - oil pressure is now present on mechanical gauge!!
Thanks again!
Re: Need an engineering mindset…951 crank pulleys
Posted: Sun Sep 10, 2023 5:14 pm
by chris white
Nice
Re: Need an engineering mindset…951 crank pulleys
Posted: Sun Sep 10, 2023 5:29 pm
by Drscottsmith
Chris -
PM me what I owe you for the washers and postage.
Thanks!