944/968 Base Active suspension development

Naturally aspirated tech and talk
Post Reply
BasHenneman
Posts: 48
Joined: Sun Mar 17, 2024 11:53 pm
Has thanked: 14 times
Been thanked: 15 times
As I had a really nice set on my 944 from Intrax, the 1K2 stock version, I wanted to have something similar for my 968.

When the time came, I reached out to Donald from Intrax Suspension Technology (https://www.intraxracing.nl/) who hooked me up with the same set but now with a discount! :)

But while talking to them, we discovered that they were in need of making motorsport cabling for their EMC system.

The EMC system is the Electronic Magnetic Control system, that allows you to change the stiffness of the shocks electronically from inside the car while driving.
Now of course, I had my set changed to that too, but now this is where it gets interested.

As I'm running my MaxxECU and I'm already data logging a lot of information, we're now going to upgrade this; I'm installing accelerometers and height meters on each wheel. This, together with brake pressure will allow us to data log this good enough that we can get this setup working actively.

If anyone here has some experience with accelerometes, please let me know!
We have found this sensor for BMW's: 37155A0F905 but they are rather expensive, if a cheaper version can be found, i'll be interested!

Let me know any questions! :)
Add Pictures/Files
IMG_2628(3).jpg
IMG_2628(3).jpg (2.28 MiB) Viewed 1028 times
IMG_2630(2).jpg
IMG_2630(2).jpg (2.34 MiB) Viewed 1028 times
IMG_2631(1).jpg
IMG_2631(1).jpg (2.36 MiB) Viewed 1028 times
IMG_2632(2).jpg
IMG_2632(2).jpg (2.56 MiB) Viewed 1028 times

#1

Top
BasHenneman
Posts: 48
Joined: Sun Mar 17, 2024 11:53 pm
Has thanked: 14 times
Been thanked: 15 times
Update on this:
Picked up my set last Friday from Intrax and started with the installation.
Front shocks are mounted, rears are a bit more difficult as I need to remove the full rear axle..
Add Pictures/Files
IMG_4045(3).jpg
IMG_4045(3).jpg (2.4 MiB) Viewed 928 times
IMG_4046(2).jpg
IMG_4046(2).jpg (5.76 MiB) Viewed 928 times
IMG_4067(2).jpg
IMG_4067(2).jpg (4.84 MiB) Viewed 928 times

#2

Top
Bergerac
Posts: 335
Joined: Mon Apr 03, 2023 3:00 pm
Has thanked: 22 times
Been thanked: 126 times
Very interesting Bas, how quickly does the EMC respond to changes in the input and will you require a H-Bridge to drive it?

You may want to look into steering angle as well unless the Maxx ECU already has a inbuilt yaw sensor.

#3

Top
BasHenneman
Posts: 48
Joined: Sun Mar 17, 2024 11:53 pm
Has thanked: 14 times
Been thanked: 15 times
Bergerac wrote: Mon Sep 15, 2025 10:51 pm Very interesting Bas, how quickly does the EMC respond to changes in the input and will you require a H-Bridge to drive it?

You may want to look into steering angle as well unless the Maxx ECU already has a inbuilt yaw sensor.
There is a controller from Intrax so no H-Bridge needed. Just a 10A feed in to the controller is needed, but when you’re a regular client, they supply you with all the cabling (made by yours truely :) )
The controller has CAN-capability so I’m working with them to get CAN displays to control the shocks!

I dont have any suspension / steering sensors yet but will probably try to get a steering angle sensor too!

#4

Top
Bergerac
Posts: 335
Joined: Mon Apr 03, 2023 3:00 pm
Has thanked: 22 times
Been thanked: 126 times
Very exciting, interested to see how this pans out.

#5

Top
User avatar
PSU_Crash
Posts: 301
Joined: Sun Apr 06, 2025 4:34 pm
Location: Decatur, Tennessee
Has thanked: 205 times
Been thanked: 117 times
Actually installing this is a pipe dream for me, but I'm here for the updates! :thumbup:
'86 Zermatt Silver 944 N/A :thumbup:
'86 Mitsubishi Starion - Purpose built SM class Autocross car
'87 Chrysler Conquest - Mid LS Swap

#6

Top
User avatar
Belgian951
Posts: 226
Joined: Tue Oct 03, 2023 3:59 am
Has thanked: 75 times
Been thanked: 33 times
Bas on carpokes? Neat. Been following your build on fb intermittently.
1986 944 Turbo Garnet Rot Metallic

#7

Top
cp99
Posts: 116
Joined: Fri Apr 07, 2023 10:25 am
Has thanked: 4 times
Been thanked: 22 times
It’s been almost a week, we need updates!
Boston-area, MA

#8

Top
Petethepug
Posts: 58
Joined: Wed Jun 25, 2025 6:00 pm
Has thanked: 1 time
Been thanked: 17 times
Nice technology especially for a vehicle with the transaxle rear suspension to constantly load all four corners. Just restored the MagRide in GM’s first iteration on our 09 Escalade Platinum. We got 180k clicks from it before it went to full bounce house mode.

It’s still underrated / undervalued technology. The beauty of the mag system is it works at 100% efficiency until failure unlike hydraulic that still provides some rebound and compression when failure begins.

Acess to suspension data as well as control of your mag fluid viscosity is a tuner’s dream.

#9

Top
BasHenneman
Posts: 48
Joined: Sun Mar 17, 2024 11:53 pm
Has thanked: 14 times
Been thanked: 15 times
Belgian951 wrote: Sat Sep 20, 2025 12:00 am Bas on carpokes? Neat. Been following your build on fb intermittently.

Hah! Welcome! I’ve been busy with house projects lately so didnt get to do much on the 968.

Front shocks are installed, waiting for some parts for my Kokeln rear axle and some stuff that is being galvanized.

I hope to have it installed next weekend!

#10

Top
Post Reply