718 Mode Dial Cover

[blueline]

Seems there are suppliers:

https://www.suncoastparts.com/product/PKREDDIAL2.html


https://www.stickerfab.com/products/spo ... e-panamera

Nice!

(I knew I had seen them somewhere before.)

[Larry C]

Seems there are suppliers:

https://www.suncoastparts.com/product/PKREDDIAL2.html


https://www.stickerfab.com/products/spo ... e-panamera

Thank you! I’m going to call Sticker Fab to see if they have Chalk available.
Great find.

[Eli992]

Are all the dial covers the same size? 992.1 and 718?

[P_Coastal]

Are all the dial covers the same size? 992.1 and 718?

Nope, go to the Carpokes Store:

https://www.carpokes.com/app.php/carpokes-store.

[PBP718]

Are these plastic or aluminum?

[Tom]

Are these plastic or aluminum?

They are resin and slide over the original so that the original does not need to be removed. Just looking at them in the car, they look like an option the factory should have offered (and probably will at some point). The are printed on a Formlabs resin printer, the same basic machine used by dentists to make crowns, then painted. "3D-Printed" might bring up thoughts of coarse surfaces with layer lines and a homemade look -- these aren't anything like that.

[Larry C]

My favorite interior mod!

[BustinJeebs]

In for 1! Sent an email to you Tom - thanks!

[Sportbiker]

Hey, Tom, found my way over here from 718, this having caught my eye. Outfitting my new-to-me '24 CGTS4.0 that is Carmine Red. I saw you'd made a cover for Ecleland that was a darker red and which he described as a close match. Can you let me know how much to remake that one and ship, if still possible?

Thanks in advance.

[blueline]

Hey, Tom, found my way over here from 718, this having caught my eye. Outfitting my new-to-me '24 CGTS4.0 that is Carmine Red. I saw you'd made a cover for Ecleland that was a darker red and which he described as a close match. Can you let me know how much to remake that one and ship, if still possible?

Thanks in advance.

In case Tom doesn't see this post, email him directly. Here is the link at the 'Store' with the admin address.
app.php/carpokes-store

Here is a photo of the one Tom made for me for my Carmine Red TTS. It looks great!

PXL_20221204_211404680.jpg (1.53 MiB) Viewed 1121 times

PXL_20221204_211311615.jpg (3.32 MiB) Viewed 1121 times