Seatbelt Bolthead Cap

Post Reply
yugami
Posts: 52
Joined: Mon Sep 04, 2023 5:19 am
Has thanked: 14 times
Been thanked: 16 times
I only have 1, but luckily I have the one.

So this is as close to OEM as I could get it and keep it nice and printable. The hex is a tiny but undersized so it snaps on nice and solid.

I printed in ABS with a 97,5% shrinkage modifier (things are scaled by 2.5 percent to compensate for the plastic becoming undersized)

Polishes up easily with 360 and 600 grit. Then SEMS Trim Black.
PXL_20240510_153458180.MP.jpg
You need to be registered and logged in to download files. Registration is free and easy!

#1

Top
Post Reply