These are always in varying degrees of decay on my cars, and I don't really love the wires flopping about..nor zip ties. I also couldn't find a standalone part number for them, and didn't feel like sifting through a hardware store.
'absgrommet.stl' is the whole thing, and 'absgrommet-half.stl' is (shockingly) the model sliced in half. This lets you slip it around the wire in-situ, rotating the seam vertically with respect to the clip opening. I'll try to remember some pictures next time I'm at the garage!
Here's the suggested print orientation (overhangs mostly work themselves out):
I printed these in whatever 95A TPU I had laying about
Edit: Kroon make a more faithful reproduction, but at 11 euro/ea!
944 (and other?) ABS (and other?) grommet
- Tom
- Site Admin
- Posts: 5243
- Joined: Fri Jun 25, 2021 2:04 pm
- Location: Silicon Valley, CA
- Has thanked: 488 times
- Been thanked: 2309 times
- Contact:
Looks awesome! I've had a TPU support bracket holding an a/c line under my car for 3 or 4 years now and it still looks new, so suspect your grommet will last a very long time
- four0four
- Posts: 147
- Joined: Wed Feb 02, 2022 10:09 pm
- Location: Western WA
- Has thanked: 18 times
- Been thanked: 23 times
Oops, the front ABS/brake pad sensor ones are different. Very roughly copied what I could from my crumbling examples, but it fits well enough
Here's those:
(I took pictures this time, but apparently moved my phone too quickly after the fact - it's one huge blur. So, those will be up later. Again.)
Pictures of installation, half of the grommet in place: The whole thing:
Here's those:
(I took pictures this time, but apparently moved my phone too quickly after the fact - it's one huge blur. So, those will be up later. Again.)
Pictures of installation, half of the grommet in place: The whole thing:
You need at least one post on Carpokes to see and download files.
-
- Posts: 4
- Joined: Thu Jul 08, 2021 11:57 am
- Has thanked: 4 times
- Been thanked: 3 times
Also available in rubber.
https://www.kroonwireharnesses.com/rubb ... rtno-kro29
Best regards from the Netherlands.
https://www.kroonwireharnesses.com/rubb ... rtno-kro29
Best regards from the Netherlands.
- Tom
- Site Admin
- Posts: 5243
- Joined: Fri Jun 25, 2021 2:04 pm
- Location: Silicon Valley, CA
- Has thanked: 488 times
- Been thanked: 2309 times
- Contact:
You guys are doing amazing things for the Porsche world. If you want to run a free banner ad in the front page rotation here, just let me know. I'd rather promote quality for free than get paid to promote sketchy parts.Kroonwireharness wrote: ↑Sun Mar 10, 2024 1:05 am Also available in rubber.
https://www.kroonwireharnesses.com/rubb ... rtno-kro29
Best regards from the Netherlands.