89 951 Boost Controller
-
byronvoyle
- Posts: 1
- Joined: Fri Nov 29, 2024 1:54 am
Hello, I would like to replace my old 89 951 manual boost controller (MBC) with an Innovate SCG-1 boost controller after discovering a few vacuum and boost leaks. Does anyone with experience with this have any advice? Thanks.
-
Tom
- Site Admin
- Posts: 6043
- Joined: Fri Jun 25, 2021 2:04 pm
- Location: Silicon Valley, CA
- Has thanked: 578 times
- Been thanked: 2626 times
- Contact:
I've never tried the Innovate controller, but tried a number of electronic controllers back in the day and settled on the Profec B (with original big solenoid). The Profec is the closest thing to electronic version of a manual, so very easy to use. From what I can tell, the Innovate has lots of great safety features -- boost cut by AFR and by PSI is very nice -- though programming it looks a little daunting. I tried a couple of boost controllers where you had to program the solenoid's duty cycle directly and I never had the patience to get it just right. If you haven't already, check out the manual to see what's involved....
https://www.innovatemotorsports.com/wp/ ... AjgPkstN_I
p.s., Welcome to Carpokes!
https://www.innovatemotorsports.com/wp/ ... AjgPkstN_I
p.s., Welcome to Carpokes!